{"title":"Regular 8","description":"\u003cp\u003e\u003cstrong\u003eCPP® Regular 8 Camlock couplings and adaptors\u003c\/strong\u003e give you a quick way to connect liquid-transfer hoses, pumps, tanks and pipework. Choose from the eight familiar Camlock types—A, B, C, D, E, F, DC and DP—with threaded connections, hose tails, dust caps and dust plugs.\u003c\/p\u003e\n\u003cp\u003eManufactured from \u003cstrong\u003eglass-filled polypropylene (GFPP)\u003c\/strong\u003e, the range includes BSP and NPT thread options, mixed-size connections and True 1¼″ Camlock heads. Check the Camlock head size and the hose or thread size separately to select the correct fitting.\u003c\/p\u003e\n\u003ch3\u003eChoose your Camlock type\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eType \/ Part\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eConnection\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-a\"\u003eType A (Part A)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMale Camlock × female thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-b\"\u003eType B (Part B)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFemale Camlock × male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-c\"\u003eType C (Part C)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFemale Camlock × hose tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-d\"\u003eType D (Part D)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFemale Camlock × female thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-e\"\u003eType E (Part E)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMale Camlock × hose tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-f\"\u003eType F (Part F)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMale Camlock × male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-dc\"\u003eType DC (Part DC)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFemale Camlock dust cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-dp\"\u003eType DP (Part DP)\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eMale Camlock dust plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSelected sizes also include a \u003cstrong\u003elockable Type DC dust cap\u003c\/strong\u003e, listed as Type DCL (Part DCL). Dust caps and plugs protect disconnected fittings from dirt and debris; use them on depressurised connections, not as pressure-retaining closures.\u003c\/p\u003e\n\u003ch3\u003eMaterials and sealing\u003c\/h3\u003e\n\u003cp\u003eThe bodies are glass-filled polypropylene. Female Camlock couplers and caps carry \u003cstrong\u003e304 stainless steel cam arms, rings and pins\u003c\/strong\u003e and a \u003cstrong\u003epolypropylene-based elastomer gasket\u003c\/strong\u003e. Male adaptors and plugs mate with the arms and gasket in the female coupler. The Camlock gasket seals the Camlock joint; threaded connections require their own suitable sealing arrangement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching-size Camlock heads manufactured to \u003cstrong\u003eEN 14420-7\u003c\/strong\u003e or US specification \u003cstrong\u003eA-A-59326\u003c\/strong\u003e. Select the correct head size and check the mating dimensions.\u003c\/p\u003e\n\u003ch3\u003eBSPT, BSPP and NPT threads\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSP male connections:\u003c\/strong\u003e BSPT (British Standard Pipe Taper), tapered external threads to \u003cstrong\u003eISO 7-1\u003c\/strong\u003e, designation R.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBSP female connections:\u003c\/strong\u003e BSPP (British Standard Pipe Parallel), parallel internal threads to \u003cstrong\u003eISO 228-1\u003c\/strong\u003e, designation G.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPT connections:\u003c\/strong\u003e National Pipe Taper, with tapered male or female threads to \u003cstrong\u003eASME B1.20.1\u003c\/strong\u003e, where listed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBSP and NPT are different thread standards. Check the individual product specification and use a mating thread and sealing method suitable for the fitting, liquid and operating conditions. Avoid overtightening plastic threads.\u003c\/p\u003e\n\u003ch3\u003eGetting the size right\u003c\/h3\u003e\n\u003cp\u003eA nominal hose or thread size does not necessarily identify the Camlock head. For example, some fittings with a ½″ connection use a ¾″ Camlock head. The range also includes 1¼″ connections with 1″, True 1¼″ or 1½″ Camlock heads. Check both ends using the \u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCPP® Camlock size chart\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCamlock size category\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e−10°C\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e20°C\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e65°C\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e½″–2″\u003c\/td\u003e\n\u003ctd\u003e5 bar \/ approx. 73 psi\u003c\/td\u003e\n\u003ctd\u003e6.5 bar \/ approx. 94 psi\u003c\/td\u003e\n\u003ctd\u003e3 bar \/ approx. 44 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3″\u003c\/td\u003e\n\u003ctd\u003e3 bar \/ approx. 44 psi\u003c\/td\u003e\n\u003ctd\u003e5 bar \/ approx. 73 psi\u003c\/td\u003e\n\u003ctd\u003e2 bar \/ approx. 29 psi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4″\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003ctd\u003e3.5 bar \/ approx. 51 psi\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThese guide ratings are based on water service and apply to the flow-through Camlock couplings and adaptors, not dust caps or plugs. The complete assembly is limited by its lowest-rated component. Verify suitability by testing under the intended operating conditions and meet applicable health and safety requirements. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\n\u003ch3\u003eBefore installation\u003c\/h3\u003e\n\u003cp\u003eCheck the compatibility of the body, gasket and connected components with the liquid and temperature. Secure hose tails with suitable clamps, support hoses and pipework to reduce strain, and release pressure before disconnecting.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eCPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cdetails\u003e\u003csummary\u003eView the eight Camlock types\u003c\/summary\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-a\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CMA20B027_100x100.png?v=1733863750\" alt=\"CPP Type A (Part A) Male Camlock × female thread\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-a\"\u003eType A (Part A)\u003c\/a\u003e\u003cbr\u003eMale Camlock × female thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-b\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfb-20b-027_100x100.jpg?v=1728230605\" alt=\"CPP Type B (Part B) Female Camlock × male thread\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-b\"\u003eType B (Part B)\u003c\/a\u003e\u003cbr\u003eFemale Camlock × male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-c\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc-20t-027_100x100.jpg?v=1728230680\" alt=\"CPP Type C (Part C) Female Camlock × hose tail\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-c\"\u003eType C (Part C)\u003c\/a\u003e\u003cbr\u003eFemale Camlock × hose tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-d\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-20b-027_100x100.jpg?v=1728230792\" alt=\"CPP Type D (Part D) Female Camlock × female thread\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-d\"\u003eType D (Part D)\u003c\/a\u003e\u003cbr\u003eFemale Camlock × female thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-e\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cme20t027_100x100.png?v=1728231511\" alt=\"CPP Type E (Part E) Male Camlock × hose tail\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-e\"\u003eType E (Part E)\u003c\/a\u003e\u003cbr\u003eMale Camlock × hose tail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-f\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cmf-20b-027_100x100.jpg?v=1728231600\" alt=\"CPP Type F (Part F) Male Camlock × male thread\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-f\"\u003eType F (Part F)\u003c\/a\u003e\u003cbr\u003eMale Camlock × male thread\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-dc\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfh20c027_100x100.png?v=1728230858\" alt=\"CPP Type DC (Part DC) Female Camlock dust cap\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-dc\"\u003eType DC (Part DC)\u003c\/a\u003e\u003cbr\u003eFemale Camlock dust cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"https:\/\/cpp.parts\/collections\/part-dp\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cmp-20p-027_100x100.jpg?v=1728231671\" alt=\"CPP Type DP (Part DP) Male Camlock dust plug\" width=\"100\" height=\"100\" loading=\"lazy\"\u003e\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"https:\/\/cpp.parts\/collections\/part-dp\"\u003eType DP (Part DP)\u003c\/a\u003e\u003cbr\u003eMale Camlock dust plug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/details\u003e\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/camlock_cat_600-210x210.png?v=1725804881\" alt=\"CPP Camlock coupling range\"\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg height=\"131\" width=\"131\" alt=\"CPP Made in Britain\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CPP_mib_logo_S60_px600.png?v=1772634348\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e","products":[{"product_id":"1-2-part-b-3-4-camlock-coupler-x-1-2-bspt-male-g-p-p","title":"¾″ Female Camlock × ½″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework with a suitable ½″ female threaded connection. The male threaded end provides a fixed connection, while the Camlock end allows quick connection and disconnection.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female, Type B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ½″ BSPT male (British Standard Pipe Taper).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1, designation R½.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB05B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the BSPT thread. The Camlock head is ¾″, so select a matching ¾″ male adaptor.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product uses BSPT male threads to ISO 7-1.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck the mating thread and use a thread-sealing method suitable for polypropylene and the application. Avoid overtightening the plastic thread. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the coupling, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493496267100,"sku":"CFB05B027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB05B027.png?v=1786542778"},{"product_id":"1-2-part-b-3-4-camlock-coupler-x-1-2-npt-male-g-p-p","title":"¾″ Female Camlock × ½″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework through its ½″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ½″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB05N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a ½″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493496758620,"sku":"CFB05N027","price":9.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB05B027_a29faa5c-eb08-41f1-b9f5-b22d4971fe1d.png?v=1786542837"},{"product_id":"1x1-part-b-camlock-coupler-x-1-bsp-male-g-p-p","title":"1″ Female Camlock × 1¼″ BSP Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB1012B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493497479516,"sku":"CFB1012B027","price":18.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFD1012B027.png?v=1786542922"},{"product_id":"1x1-part-b-camlock-coupler-x-1-npt-male-g-p-p","title":"1″ Female Camlock × 1¼″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1¼″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB1012N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493499085148,"sku":"CFB1012N027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFD1012B027_9369b72c-6be4-437f-bbd1-e63a812e2584.png?v=1786542957"},{"product_id":"1-part-b-1-camlock-coupler-x-1-bspt-male-g-p-p","title":"1″ Female Camlock × 1″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB10B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493500494172,"sku":"CFB10B027","price":11.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB10B027.png?v=1786546544"},{"product_id":"1-part-b-1-camlock-coupler-x-1-npt-male-g-p-p","title":"1″ Female Camlock × 1″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB10N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493501509980,"sku":"CFB10N027","price":11.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB10B027_dc5177d0-72d0-4d69-b9a2-b44bb04bbc3e.png?v=1786546587"},{"product_id":"1-1-2-x-11-4-part-b-11-2-camlock-coupler-x-11-4-bspt-male-g-p-p","title":"1½″ Female Camlock × 1¼″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB12B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493502525788,"sku":"CFB12B027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB12B027.png?v=1786543068"},{"product_id":"1-1-2-x-11-4-part-b-11-2-camlock-coupler-x-11-4-npt-male-g-p-p","title":"1½″ Female Camlock × 1¼″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1¼″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB12N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493503377756,"sku":"CFB12N027","price":18.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB12B027_3db9d290-5ef6-49d8-8228-58024d8b1e6c.png?v=1786543102"},{"product_id":"11-2-part-b-11-2-camlock-coupler-x-11-2-bspt-male-g-p-p","title":"1½″ Female Camlock × 1½″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1½″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1½″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 1½.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB15B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1½″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493504262492,"sku":"CFB15B027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB15B027.png?v=1786543148"},{"product_id":"11-2-part-b-11-2-camlock-coupler-x-11-2-npt-male-g-p-p","title":"1½″ Female Camlock × 1½″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1½″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1½″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB15N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1½″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493505474908,"sku":"CFB15N027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB15B027_7dbfd7d9-d089-42bd-b7dd-7b12c53f887e.png?v=1786543189"},{"product_id":"true-1-part-b-1-camlock-coupler-x-1-bspt-male-g-p-p","title":"True 1¼″ Female Camlock × 1¼″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching True 1¼″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB16B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is True 1¼″; check both connections when selecting the fitting. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493507637596,"sku":"CFB16B027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB16B027_1815f7fe-8170-4783-bcde-a9e3cd819fb7.png?v=1786543229"},{"product_id":"true-1-part-b-1-camlock-coupler-x-1-npt-male-g-p-p","title":"True 1¼″ Female Camlock × 1¼″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching True 1¼″ male Camlock adaptor to equipment or pipework through its 1¼″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB16N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is True 1¼″; check both connections when selecting the fitting. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493509079388,"sku":"CFB16N027","price":18.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB16B027_991bfc5d-e3f2-47e2-ad17-5fedfdfebd9a.png?v=1786543269"},{"product_id":"2-part-b-2-camlock-coupler-x-2-bspt-male-g-p-p","title":"2″ Female Camlock × 2″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its 2″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 2″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB20B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 2″ measurement refers to the nominal pipe thread size. The Camlock head is 2″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 2″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493515895132,"sku":"CFB20B027","price":20.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB20B027.png?v=1786543312"},{"product_id":"3-part-b-3-camlock-coupler-x-3-bsp-male-g-p-p","title":"3″ Female Camlock × 3″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 3″ male Camlock adaptor to equipment or pipework through its 3″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB30B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ measurement refers to the nominal pipe thread size. The Camlock head is 3″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 3″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493518582108,"sku":"CFB30B027","price":35.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB30B027_65a186df-a128-4996-a217-40c8f5cb214f.png?v=1786543353"},{"product_id":"3-part-b-3-camlock-coupler-x-3-npt-male-g-p-p","title":"3″ Female Camlock × 3″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 3″ male Camlock adaptor to equipment or pipework through its 3″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB30N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ measurement refers to the nominal pipe thread size. The Camlock head is 3″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 3″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493520613724,"sku":"CFB30N027","price":35.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB30B027_a862f012-33f8-4087-a258-81dd5d7b65f1.png?v=1786543386"},{"product_id":"4-part-b-4-camlock-coupler-x-4-bsp-male-g-p-p","title":"4″ Female Camlock × 4″ BSP Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 4″ male Camlock adaptor to equipment or pipework through its 4″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 4″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R 4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB40B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ measurement refers to the nominal pipe thread size. The Camlock head is 4″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 4″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493524873564,"sku":"CFB40B027","price":50.39,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB40B027.png?v=1786543417"},{"product_id":"4-part-b-4-camlock-coupler-x-4-npt-male-g-p-p","title":"4″ Female Camlock × 4″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching 4″ male Camlock adaptor to equipment or pipework through its 4″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 4″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB40N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ measurement refers to the nominal pipe thread size. The Camlock head is 4″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 4″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493525168476,"sku":"CFB40N027","price":53.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB40B027_62aad05c-2d84-48f8-a8b2-618f78fd0202.png?v=1786543457"},{"product_id":"part-b-camlock-coupler-x-bspt-male-g-p-p","title":"¾″ Female Camlock × ¾″ BSPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework through its ¾″ BSPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ¾″ BSPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 7-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread; R ¾.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB75B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a ¾″ BSPT male thread to ISO 7-1. Use a compatible mating thread and a sealing method suitable for plastic fittings and the liquid being transferred.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493525627228,"sku":"CFB75B027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB75B027.png?v=1786543491"},{"product_id":"part-b-camlock-coupler-x-npt-male-g-p-p","title":"¾″ Female Camlock × ¾″ NPT Male (Type B) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type B (Part B) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework through its ¾″ NPT male thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type B (Part B)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ¾″ NPT male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered external thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFB75N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a ¾″ tapered male thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493526479196,"sku":"CFB75N027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFB75B027_a06f2aed-3eb5-4aec-a235-fcfb1db9331c.png?v=1786543525"},{"product_id":"1-2-part-c-3-4-camlock-coupler-x-1-2-13mm-hose-tail-g-p-p","title":"¾″ Female Camlock × ½″ (13mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 13mm internal diameter to a matching ¾″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female, Type C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e ½″ (13mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC05T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the hose size. The Camlock head is ¾″, so select a matching ¾″ male adaptor.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the coupling, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493527822684,"sku":"CFC05T027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/dad78d27-103c-4e1a-8528-7cf054c68c31.png?v=1787225101"},{"product_id":"1-x-1-part-c-1-camlock-coupler-x-1-32mm-hose-tail-g-p-p","title":"1″ Female Camlock × 1¼″ (32mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 32mm internal diameter to a matching 1″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1¼″ (32mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC1012T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ (32mm) measurement refers to the nominal hose internal diameter. The Camlock head is 1″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493529231708,"sku":"CFC1012T027","price":17.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc1012t027.png?v=1728230646"},{"product_id":"1-part-c-1-camlock-coupler-x-hose-tail-g-p-p","title":"1″ Female Camlock × ¾″ (19mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 19mm internal diameter to a matching 1″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e ¾″ (19mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC1075T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ (19mm) measurement refers to the nominal hose internal diameter. The Camlock head is 1″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493530378588,"sku":"CFC1075T027","price":14.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/CFC1075T027-3.png?v=1747303956"},{"product_id":"1-part-c-1-camlock-coupler-x-1-25mm-hose-tail-g-p-p","title":"1″ Female Camlock × 1″ (25mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 25mm internal diameter to a matching 1″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1″ (25mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC10T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ (25mm) measurement refers to the nominal hose internal diameter. The Camlock head is 1″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493531853148,"sku":"CFC10T027","price":11.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc10t027.png?v=1728230658"},{"product_id":"1-1-2-x-1-part-c-1-camlock-coupler-x-1-32mm-hose-tail-g-p-p","title":"1½″ Female Camlock × 1¼″ (32mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 32mm internal diameter to a matching 1½″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1¼″ (32mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC12T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ (32mm) measurement refers to the nominal hose internal diameter. The Camlock head is 1½″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493533196636,"sku":"CFC12T027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc12t027.png?v=1728230663"},{"product_id":"1-part-c-1-camlock-coupler-x-1-38mm-hose-tail-g-p-p","title":"1½″ Female Camlock × 1½″ (38mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 38mm internal diameter to a matching 1½″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1½″ (38mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC15T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ (38mm) measurement refers to the nominal hose internal diameter. The Camlock head is 1½″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493534212444,"sku":"CFC15T027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc-15t-027-photorealistic-transparent-900.png?v=1786099336"},{"product_id":"true-1-part-c-1-camlock-coupler-x-1-32mm-hose-tail-g-p-p","title":"True 1¼″ Female Camlock × 1¼″ (32mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 32mm internal diameter to a matching True 1¼″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 1¼″ (32mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC16T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ (32mm) measurement refers to the nominal hose internal diameter. The Camlock head is True 1¼″; select a matching male Camlock connection. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493535457628,"sku":"CFC16T027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc16t027.png?v=1728230673"},{"product_id":"2-part-c-2-camlock-coupler-x-2-50mm-hose-tail","title":"2″ Female Camlock × 2″ (50mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 50mm internal diameter to a matching 2″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 2″ (50mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC20T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 2″ (50mm) measurement refers to the nominal hose internal diameter. The Camlock head is 2″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493536473436,"sku":"CFC20T027","price":20.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc-20t-027.jpg?v=1728230680"},{"product_id":"3-part-c-3-camlock-coupler-x-3-75mm-hose-tail","title":"3″ Female Camlock × 3″ (75mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 75mm internal diameter to a matching 3″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 3″ (75mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC30T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ (75mm) measurement refers to the nominal hose internal diameter. The Camlock head is 3″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493541257564,"sku":"CFC30T027","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc-30t-027.jpg?v=1728230704"},{"product_id":"4-part-c-4-camlock-coupler-x-4-100mm-hose-tail-g-p-p","title":"4″ Female Camlock × 4″ (100mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 100mm internal diameter to a matching 4″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e 4″ (100mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC40T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ (100mm) measurement refers to the nominal hose internal diameter. The Camlock head is 4″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493541945692,"sku":"CFC40T027","price":51.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc-40t-027.jpg?v=1728230710"},{"product_id":"part-c-camlock-coupler-x-19mm-hose-tail-g-p-p","title":"¾″ Female Camlock × ¾″ (19mm) Hose Tail (Type C) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type C (Part C) coupling connects a hose with a nominal 19mm internal diameter to a matching ¾″ male Camlock adaptor. It provides a quick connection for liquid-transfer hoses, with a barbed hose tail for use with a suitable hose clamp.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type C (Part C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose connection:\u003c\/strong\u003e ¾″ (19mm) nominal hose internal diameter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e None.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFC75T027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ (19mm) measurement refers to the nominal hose internal diameter. The Camlock head is ¾″; select a matching male Camlock connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eSecure the hose tail with a clamp suitable for the hose and application. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493543125340,"sku":"CFC75T027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfc75t027.png?v=1728230716"},{"product_id":"1-2-part-d-3-4-camlock-coupler-x-1-2-bsp-female-g-p-p","title":"¾″ Female Camlock × ½″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework with a suitable ½″ male threaded connection. It combines a female threaded connection with a Camlock socket for quick connection and disconnection.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female, Type D.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreaded connection:\u003c\/strong\u003e ½″ BSPP female (British Standard Pipe Parallel).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1, designation G½.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD05B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the BSPP thread. The Camlock head is ¾″, so select a matching ¾″ male adaptor.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product uses BSPP female threads to ISO 228-1.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eCheck the mating thread and provide a sealing arrangement suitable for the BSPP connection and the application. The Camlock gasket seals the Camlock connection; it does not seal the threaded joint. Avoid overtightening the plastic thread. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the coupling, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493544501596,"sku":"CFD05B027","price":10.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/c7678835-4140-465f-a328-b5b2426aa290.png?v=1787225108"},{"product_id":"1-2-part-d-3-4-camlock-coupler-x-1-2-nps-female-g-p-p","title":"¾″ Female Camlock × ½″ NPS Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework through its ½″ NPS female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ½″ NPS female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Straight\/parallel female thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD05N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ½″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493545648476,"sku":"CFD05N027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-05b-027b.jpg?v=1728230728"},{"product_id":"1x-1-part-d-1-camlock-coupler-x-1-bsp-female-g-p-p","title":"1″ Female Camlock × 1¼″ BSP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD1012B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493546926428,"sku":"CFD1012B027","price":21.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-1012b-027.jpg?v=1728230734"},{"product_id":"1x-1-part-d-1-camlock-coupler-x-1-npt-female-g-p-p","title":"1″ Female Camlock × 1¼″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1¼″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD1012N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493548040540,"sku":"CFD1012N027","price":18.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-1012b-027_2606b4ac-8e63-48ad-904e-719a2eedec19.jpg?v=1728230739"},{"product_id":"1-part-d-1-camlock-coupler-x-1-bsp-female-g-p-p","title":"1″ Female Camlock × 1″ BSP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD10B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493549285724,"sku":"CFD10B027","price":11.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-10b-027.jpg?v=1728230745"},{"product_id":"1-part-d-1-camlock-coupler-x-1-npt-female-g-p-p","title":"1″ Female Camlock × 1″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1″ male Camlock adaptor to equipment or pipework through its 1″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD10N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1″ measurement refers to the nominal pipe thread size. The Camlock head is 1″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493550694748,"sku":"CFD10N027","price":11.06,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd10n027.png?v=1728230750"},{"product_id":"1-1-2-x-1-part-d-1-camlock-coupler-x-1-bsp-female-g-p-p","title":"1½″ Female Camlock × 1¼″ BSP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD12B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493551972700,"sku":"CFD12B027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd12b027.png?v=1728230757"},{"product_id":"1-1-2-x-11-4-part-d-11-2-camlock-coupler-x-11-4-npt-female-g-p-p","title":"1½″ Female Camlock × 1¼″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1¼″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD12N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493553185116,"sku":"CFD12N027","price":18.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-12b-027.jpg?v=1728401222"},{"product_id":"11-2-part-d-11-2-camlock-coupler-x-11-2-bsp-female-g-p-p","title":"1½″ Female Camlock × 1½″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1½″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1½″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1½.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD15B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1½″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493553611100,"sku":"CFD15B027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-15b-027.jpg?v=1728230763"},{"product_id":"1-part-d-1-camlock-coupler-x-1-npt-female-g-p-p-1","title":"1½″ Female Camlock × 1½″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 1½″ male Camlock adaptor to equipment or pipework through its 1½″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 1½″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1½″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD15N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 1½″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1½″ measurement refers to the nominal pipe thread size. The Camlock head is 1½″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1½″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493554790748,"sku":"CFD15N027","price":21.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd15n027.png?v=1728230769"},{"product_id":"true-1-part-d-1-camlock-coupler-x-1-bsp-female-g-p-p","title":"True 1¼″ Female Camlock × 1¼″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching True 1¼″ male Camlock adaptor to equipment or pipework through its 1¼″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 1¼.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD16B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is True 1¼″; check both connections when selecting the fitting. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 1¼″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493555577180,"sku":"CFD16B027","price":18.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd16b027.png?v=1728230774"},{"product_id":"true-1-part-d-1-camlock-coupler-x-1-npt-female-g-p-p","title":"True 1¼″ Female Camlock × 1¼″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching True 1¼″ male Camlock adaptor to equipment or pipework through its 1¼″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e True 1¼″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1¼″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD16N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching True 1¼″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 1¼″ measurement refers to the nominal pipe thread size. The Camlock head is True 1¼″; check both connections when selecting the fitting. This is the true 1¼″ Camlock profile; check the head dimensions to distinguish it from products with a 1½″ Camlock head and a 1¼″ hose or thread connection.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 1¼″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493556560220,"sku":"CFD16N027","price":18.54,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd16b027.png?v=1728230774"},{"product_id":"2-part-d-2-camlock-coupler-x-2-bsp-female-g-p-p","title":"2″ Female Camlock × 2″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its 2″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 2″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 2.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD20B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 2″ measurement refers to the nominal pipe thread size. The Camlock head is 2″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 2″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493558559068,"sku":"CFD20B027","price":20.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-20b-027.jpg?v=1728230792"},{"product_id":"2-part-d-2-camlock-coupler-x-2-npt-female-g-p-p","title":"2″ Female Camlock × 2″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 2″ male Camlock adaptor to equipment or pipework through its 2″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 2″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 2″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD20N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 2″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 2″ measurement refers to the nominal pipe thread size. The Camlock head is 2″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 2″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493559345500,"sku":"CFD20N027","price":20.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd20n027.png?v=1728230798"},{"product_id":"3-part-d-3-camlock-coupler-x-3-bsp-female-g-p-p","title":"3″ Female Camlock × 3″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 3″ male Camlock adaptor to equipment or pipework through its 3″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD30B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ measurement refers to the nominal pipe thread size. The Camlock head is 3″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 3″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493562163548,"sku":"CFD30B027","price":35.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-30b-027.jpg?v=1728230809"},{"product_id":"3-part-d-3-camlock-coupler-x-3-npt-female-g-p-p","title":"3″ Female Camlock × 3″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 3″ male Camlock adaptor to equipment or pipework through its 3″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 3″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 3″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD30N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 3″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 3″ measurement refers to the nominal pipe thread size. The Camlock head is 3″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 3″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e2 bar (approximately 29 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 3″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493563507036,"sku":"CFD30N027","price":35.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-30b-027_135a7aad-4225-48fe-b622-cc924cbdda94.jpg?v=1728230815"},{"product_id":"4-part-d-4-camlock-coupler-x-4-bsp-female-g-p-p","title":"4″ Female Camlock × 4″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 4″ male Camlock adaptor to equipment or pipework through its 4″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 4″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G 4.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD40B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ measurement refers to the nominal pipe thread size. The Camlock head is 4″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a 4″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493564719452,"sku":"CFD40B027","price":53.92,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-40b-027.jpg?v=1728230820"},{"product_id":"4-part-d-4-camlock-coupler-x-4-npt-female-g-p-p","title":"4″ Female Camlock × 4″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching 4″ male Camlock adaptor to equipment or pipework through its 4″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e 4″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 4″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD40N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching 4″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The 4″ measurement refers to the nominal pipe thread size. The Camlock head is 4″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a 4″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e3.5 bar (approximately 51 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the 4″ size category and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component. No rating is specified for 4″ Camlocks at −10°C or 65°C.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493565735260,"sku":"CFD40N027","price":53.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-40b-027_d2c5e111-ebe1-4706-9485-ebd6eed85a65.jpg?v=1728230825"},{"product_id":"3-4-part-d-3-4-camlock-coupler-x-3-4-bsp-female-g-p-p","title":"¾″ Female Camlock × ¾″ BSPP Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework through its ¾″ BSPP female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ¾″ BSPP female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ISO 228-1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Parallel internal thread; G ¾.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD75B027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eBSPT means British Standard Pipe Taper; BSPP means British Standard Pipe Parallel. This product has a ¾″ BSPP female thread to ISO 228-1. The parallel thread requires an appropriate sealing arrangement for the mating connection.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493566816604,"sku":"CFD75B027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd75b027.jpg?v=1728230830"},{"product_id":"3-4-part-d-3-4-camlock-coupler-x-3-4-npt-female-g-p-p","title":"¾″ Female Camlock × ¾″ NPT Female (Type D) - GF Polypropylene - CPP®","description":"\u003cp\u003eThis CPP® Type D (Part D) coupling connects a matching ¾″ male Camlock adaptor to equipment or pipework through its ¾″ NPT female thread. It allows the Camlock joint to be connected and disconnected while the threaded end remains installed.\u003c\/p\u003e\u003cp\u003eManufactured from glass-filled polypropylene, the coupling includes 304 stainless steel cam arms, rings and pins, together with a polypropylene-based elastomer sealing gasket. Closing both cam arms secures the mating adaptor against the gasket.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock type:\u003c\/strong\u003e Type D (Part D)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock connection:\u003c\/strong\u003e ¾″ female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e ¾″ NPT female.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread standard:\u003c\/strong\u003e ASME B1.20.1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread form:\u003c\/strong\u003e Tapered internal thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e Glass-filled polypropylene.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eArms, rings and pins:\u003c\/strong\u003e 304 stainless steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamlock gasket:\u003c\/strong\u003e Polypropylene-based elastomer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e CFD75N027.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCamlock compatibility:\u003c\/strong\u003e Fits matching ¾″ male Camlock heads manufactured to EN 14420-7 or US specification A-A-59326.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eChoosing the correct size:\u003c\/strong\u003e The ¾″ measurement refers to the nominal pipe thread size. The Camlock head is ¾″; check both connections when selecting the fitting.\u003c\/p\u003e\u003ch3\u003eThread specification\u003c\/h3\u003e\u003cp\u003eNPT means National Pipe Taper. This product has a ¾″ tapered female thread to ASME B1.20.1. Select a matching NPT connection and a sealing method suitable for plastic fittings. NPT and BSP threads are different standards and must be selected accordingly.\u003c\/p\u003e\u003ch3\u003ePressure ratings — water service\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eTemperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePressure rating\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e−10°C\u003c\/td\u003e\n\u003ctd\u003e5 bar (approximately 73 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20°C\u003c\/td\u003e\n\u003ctd\u003e6.5 bar (approximately 94 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e65°C\u003c\/td\u003e\n\u003ctd\u003e3 bar (approximately 44 psi)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese ratings apply to CPP® Camlocks in the ½″–2″ size range and are based on water service. They are a guide only; verify suitability by testing under the intended conditions of use and meet applicable health and safety requirements. The complete assembly is limited by its lowest-rated component.\u003c\/p\u003e\u003ch3\u003eInstallation and use\u003c\/h3\u003e\u003cp\u003eUse a suitable mating thread and sealing arrangement; avoid overtightening plastic threads. The Camlock gasket seals the Camlock joint, not the threaded connection. Check compatibility of the body, gasket and connected components with the liquid and operating temperature. Support attached hoses and pipework to avoid strain on the fitting, and release system pressure before disconnecting.\u003c\/p\u003e\u003ch3\u003eTechnical guides\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/camlock-size-chart\"\u003eCheck your connection size: CPP® Camlock size chart\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/chemical-resistance\"\u003eCheck material suitability: CPP® chemical resistance guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cpp.parts\/pages\/material-application-statement\"\u003eRead the CPP® Material Application Statement\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CPP.PARTS","offers":[{"title":"Default Title","offer_id":49493568225628,"sku":"CFD75N027","price":9.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/files\/cfd-75b-027b.jpg?v=1728230836"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0855\/4250\/2748\/collections\/camlovk_reg_8_cat_2.png?v=1789562333","url":"https:\/\/cpp.parts\/collections\/regular-8.oembed?page=4","provider":"CPP.PARTS","version":"1.0","type":"link"}