Material application Statement

CPP® GLOBAL PRODUCT REGULATORY, MATERIAL & APPLICATION STATEMENT
Document No.: CPP-DOC-036
Revision: 2.0
Date: March 2026

Manufacturer
CPP-LM Ltd
United Kingdom
Website: https://cpp.parts

 

1. Purpose

This document provides general regulatory, material compliance and application information for products manufactured and supplied by CPP-LM Ltd under the CPP® brand.

This statement applies to standard CPP® catalogue products including, but not limited to:

  • IBC adaptors and tank fittings
  • Camlock couplings
  • Hose fittings and threaded adaptors
  • Tank vents and accessories
  • Sealing components and gaskets

CPP® products are designed primarily for industrial fluid handling applications including Intermediate Bulk Containers (IBC), hose transfer systems and related equipment.

Unless otherwise specified, this document applies to standard catalogue products.

 

2. Food Contact Materials

Where specified, certain CPP® products are manufactured from polymeric materials that may comply with applicable food-contact legislation including:

  • EU Regulation (EC) No. 1935/2004 – Materials intended to come into contact with food
  • EU Regulation (EU) No. 10/2011 – Plastic materials intended for food contact
  • US FDA 21 CFR – Food contact substances

Compliance is based on declarations provided by raw material manufacturers.

CPP® products are manufactured in an industrial production environment using standard injection moulding and assembly processes. Products are not manufactured, handled, or packaged in clean-room facilities and are not supplied as sterile or hygienically prepared components.

Where products are intended for food or beverage applications, components should be cleaned or sanitised prior to use.

Suitability for food contact remains the responsibility of the end user.

 

3. REACH Regulation

CPP-LM Ltd supports compliance with REACH Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals.

Based on information provided by raw material suppliers, CPP® products do not intentionally contain Substances of Very High Concern (SVHC) above the reporting threshold of 0.1% weight by weight as defined by the European Chemicals Agency (ECHA).

 

4. RoHS Directive

CPP® products are mechanical components used in industrial fluid handling systems and are generally outside the scope of the RoHS Directive 2011/65/EU relating to electrical and electronic equipment.

However, based on supplier information, materials used in CPP® products do not intentionally contain restricted substances above the limits defined by RoHS legislation.

 

5. Persistent Organic Pollutants (POP)

Based on information from material suppliers, CPP® products do not intentionally contain substances restricted under EU Regulation (EU) 2019/1021 on Persistent Organic Pollutants.

 

6. PFAS Statement

To the best of our knowledge, standard polypropylene materials used in the manufacture of CPP® products do not intentionally contain per- and polyfluoroalkyl substances (PFAS) unless specifically required for specialised product performance.

 

7. TSCA Compliance (United States)

CPP-LM Ltd supports compliance with the United States Toxic Substances Control Act (TSCA).

Based on supplier information, materials used in standard CPP® products are not intentionally manufactured using substances restricted under TSCA Section 6.

 

8. Ozone Depleting Substances

CPP® products are not manufactured using substances controlled under the Montreal Protocol on Substances that Deplete the Ozone Layer.

 

9. Animal Derived Materials (BSE / TSE)

To the best of our knowledge, standard CPP® products do not contain materials of animal origin.

Therefore risks associated with Bovine Spongiform Encephalopathy (BSE) or Transmissible Spongiform Encephalopathies (TSE) are considered not applicable.

 

10. Latex Statement

CPP® products do not intentionally contain natural rubber latex unless specifically stated in product documentation.

 

11. Halogen-Free Statement

Standard polypropylene-based CPP® products do not intentionally contain halogenated flame retardants, including brominated or chlorinated flame-retardant compounds.

 

12. Heavy Metals

Based on information from raw material suppliers, CPP® products do not intentionally contain heavy metals above applicable regulatory thresholds including:

  • Lead (Pb)
  • Mercury (Hg)
  • Cadmium (Cd)
  • Hexavalent Chromium (Cr VI)

 

12A. Silicone and Wetting Agents Statement

To the best of our knowledge, standard CPP® products are not intentionally manufactured using silicone-based additives, silicone oils, or silicone mould-release agents.

CPP-LM Ltd also does not intentionally add wetting agents, surface-active agents, or slip additives that could migrate from the product surface under normal use conditions.

Trace contamination from external sources during raw material production or processing cannot be completely excluded.

Customers requiring strict silicone-free or surfactant-free conditions should verify suitability for their specific application.

 

13. California Proposition 65

Based on available supplier information, CPP-LM Ltd is not aware that standard CPP® products intentionally contain substances listed under the California Safe Drinking Water and Toxic Enforcement Act (Proposition 65) above reporting thresholds.

 

14. Conflict Minerals

CPP-LM Ltd supports responsible sourcing practices.

Based on supplier declarations, standard CPP® products do not intentionally contain conflict minerals (tin, tantalum, tungsten or gold) originating from conflict regions as defined under Section 1502 of the US Dodd-Frank Act.

 

15. Packaging

CPP® products are supplied using commercial packaging materials including cardboard cartons and polyethylene packaging.

Packaging materials generally comply with the EU Packaging Directive 94/62/EC.

 

16. Manufacturing

CPP® products are manufactured using established industrial processes including:

  • Injection moulding of engineering thermoplastics
  • Assembly of mechanical components
  • Installation of elastomer sealing systems
  • Integration of stainless steel parts where required

Products are supplied in standard commercial packaging and may require cleaning prior to use in sensitive applications.[1]

 

17. Engineering and Quality

CPP-LM Ltd designs and manufactures industrial fluid-handling components intended for professional use.

Materials used in CPP® products are selected for mechanical strength, chemical resistance and durability in typical industrial environments.

Quality control procedures may include:

  • dimensional inspection
  • batch traceability where applicable
  • supplier material certification

 

18. Chemical Compatibility and Application

CPP® products are commonly used in applications involving water, industrial chemicals, cleaning agents, agricultural liquids and food products transported in bulk containers.

Chemical compatibility depends on multiple factors including:

  • chemical composition
  • concentration
  • temperature
  • pressure
  • exposure time
  • mechanical stress

Even materials known to have good chemical resistance may degrade under certain conditions.

Users must verify compatibility of the product materials with the intended fluid and operating conditions before use.

 

19. User Responsibility

It is the responsibility of the customer and end user to determine the suitability of CPP® products for their intended application.

Users must consider:

  • chemical compatibility
  • operating pressure and temperature
  • system design and installation
  • regulatory requirements within the destination country

CPP-LM Ltd cannot evaluate every possible application environment.

 

20. Disclaimer

This document is provided in good faith based on information available from raw material suppliers and current regulatory knowledge at the time of publication.

This statement does not constitute product certification and does not replace the requirement for users to verify compliance with local regulations and specific application conditions.

CPP-LM Ltd reserves the right to update this document as regulatory requirements evolve.

 

21. Company Information

CPP-LM Ltd
United Kingdom

Manufacturer of industrial fluid-handling components including IBC fittings, adaptors, vents and hose connections.

Website: https://cpp.parts

Authorised by

Julian Trought
Director
CPP-LM Ltd

Date: March 2026

 


[1]